In this post, we will address the main problems concerning the possible casting defects that could arise in the die-casting process and which would compromise the success of subsequent surface treatment. This treatment, which can be a galvanic or a painting, can be carried out for aesthetic and functional reasons.

by Yassir Rhila September 6, 2023

 

This post deals with the fundamentals of die casting machines and their role in the whole die casting process. Moreover, the post gives an outlook on the sector's future perspectives.

by Ermo Fusè April 15, 2021

In this post, focused on the metrology laboratory, we will describe the devices employed to measure and test zinc alloy die casts intended for different market sectors.

by Vera Agostini December 4, 2019

In this post we are going to analyze a case study that explains how to reduce casting defects through mold design. Due to mold wear condition components started to show superficial defects: Bruschi engineers have thus introduced improvements in order to reduce casting defects.

by Arianna Piersigilli March 7, 2019

In this post we are going to explore a case study dedicated to the improvement of mechanical characteristics, by reducing shrinkage porosity in a component for building sector. This post is part of a series in which we explain the importance of simulation for HPDC (High Pressure Die Casting) through the presentation of real life cases.

by Marcello Cazzaniga August 28, 2018

In this series of posts, we are going to explain the importance of simulation for HPDC (High Pressure Die Casting) through the presentation of different case studies, in which simulation played a crucial role.

by Marcello Cazzaniga July 23, 2018

In this post we are going to analyze some surface defects in die casting linked to errors in the painting process of zinc die cast products.

by Caterina Tosca April 9, 2018

In this post we are going to list the most common defects in zinc die casting surface treatments and explain how to prevent them. We are going to analyze the following defects: blisters, pitting, burnings, nodules and flaking.

by Caterina Tosca March 5, 2018

 In this post we are going to discuss some of the most common defects in die casting linked to mold maintenance, and how they can be fixed by the maintenance department. 

by Caterina Tosca November 10, 2017

In this post we are going to describe in detail the relation between mold maintenance department and foundry: how the inclusion of maintenance department and tooling department in the production area can bring actual economic advantages and time saving.

by Caterina Tosca October 13, 2017

If you wish to be updated on news from the world of Die Casting, subscribe to our Blog.

New Call-to-action

Recent Posts